Agricultural spray nozzles

Accuracy is one of the most important things, so we know that your results depend on it. Here you will find a wide range of agricultural spray nozzles from the best manufacturers.

Showing 1–16 of 51 results

Active filters
Clear Filters
Slotted high-quality cone nozzle, in which pesticides enter the created chamber before spraying. While rotating, together with the water, the still large enough pesticide particles are torn into much smaller ones and only then are they sprayed through the nozzle hole. Small droplets with forced downward direction. Negative air pressure is created at the top of the cone. And the air is very intensively pumped into the cone. The suction air moves from the cone downwards thus directing the droplets downwards. Pressure, vortex, speed of movement - these are the factors that form very small EFFECTIVE liquid droplets that contain a particle of pesticide. • 50 mesh filter • Corrosion resistant steel • Lower rate of spray liquid • 7000 hours of nozzle operation • Small droplets with a forced downward direction. • When driving at a speed of 7 km/h with a 2000 liter tank, it is possible to spray an area of ​​about 40 hectares.
Available: instock
14.40
Slotted high-quality cone nozzle, in which pesticides enter the created chamber before spraying. While rotating, together with the water, the still large enough pesticide particles are torn into much smaller ones and only then are they sprayed through the nozzle hole. Small droplets with forced downward direction. Negative air pressure is created at the top of the cone. And the air is very intensively pumped into the cone. The suction air moves from the cone downwards thus directing the droplets downwards. Pressure, vortex, speed of movement - these are the factors that form very small EFFECTIVE liquid droplets that contain a particle of pesticide. • 50 mesh filter • Corrosion resistant steel • Lower rate of spray liquid • 7000 hours of nozzle operation • Small droplets with a forced downward direction. • When driving at a speed of 14 km/h with a 2000 liter tank, it is possible to spray an area of ​​about 40 hectares.
Available: instock
14.40
Slotted high-quality cone nozzle, in which pesticides enter the created chamber before spraying. While rotating, together with the water, the still large enough pesticide particles are torn into much smaller ones and only then are they sprayed through the nozzle hole. Small droplets with forced downward direction. Negative air pressure is created at the top of the cone. And the air is very intensively pumped into the cone. The suction air moves from the cone downwards thus directing the droplets downwards. Pressure, vortex, speed of movement - these are the factors that form very small EFFECTIVE liquid droplets that contain a particle of pesticide. • 50 mesh filter • Corrosion resistant steel • Lower rate of spray liquid • 7000 hours of nozzle operation • Small droplets with a forced downward direction.
Available: instock
14.40
RD.10.S5 Fertilizer sprayer for applying liquid mineral fertilizers. Due to its construction, the nozzle creates large drops that fall on the leaves and slide into the soil, and the plant avoids burns. • Corrosion resistant steel • Lower rate of spray liquid • 7000 hours of nozzle operation
Available: outofstock
13.99
Slotted high-quality cone nozzle, in which pesticides enter the created chamber before spraying. While rotating, together with the water, the still large enough pesticide particles are torn into much smaller ones and only then are they sprayed through the nozzle hole. Small droplets with forced downward direction. Negative air pressure is created at the top of the cone. And the air is very intensively pumped into the cone. The suction air moves from the cone downwards thus directing the droplets downwards. Pressure, vortex, speed of movement - these are the factors that form very small EFFECTIVE liquid droplets that contain a particle of pesticide. • 50 mesh filter • Corrosion resistant steel • Lower rate of spray liquid • 7000 hours of nozzle operation • Small droplets with a forced downward direction. • When driving at a speed of 28 km/h with a 2000 liter tank, it is possible to spray an area of ​​about 40 hectares.
Available: instock
14.40
Slotted high-quality cone nozzle, in which pesticides enter the created chamber before spraying. While rotating, together with the water, the still large enough pesticide particles are torn into much smaller ones and only then are they sprayed through the nozzle hole. Small droplets with forced downward direction. A negative air pressure is created at the top of the cone. And the air is very intensively pumped into the cone. The suction air moves from the cone downwards thus directing the droplets downwards. Pressure, vortex, speed of movement - these are the factors that form very small EFFECTIVE liquid droplets that contain a particle of pesticide. • 50 mesh filter • Corrosion resistant steel • Lower rate of spray liquid • 7000 hours of nozzle operation • Small droplets with a forced downward direction. • When driving at a speed of 9 km/h with a 2000 liter tank, it is possible to spray an area of ​​about 40 hectares.
Available: instock
14.40
Five streams of liquid are distributed at different angles and flows by each Quintastream nozzle. The highest flow is from the middle stream and the lowest is in the outer, overlapping streams. • The fastest way to convert your sprayer into a high precision fertilizer applicator • 5 solid streams that minimize crop scorching • Particularly important for wide booms at fast speeds • ISO standard for easy calibration • Turn and Clean key for restrictor removal • Boom height 35-100 cm
Available: instock
14.50
Five streams of liquid are distributed at different angles and flows by each Quintastream nozzle. Highest flow is from the middle stream and the lowest in the outer, overlapping streams. • The fastest way to convert your sprayer into a high precision fertilizer applicator • 5 solid streams that minimize crop scorching • Particularly important for wide booms at fast speeds • ISO standard for easy calibration • Turn and Clean key for restrictor removal • Boom height 35-100 cm
Available: instock
13.99
The HARDI MINIDRIFT nozzle can be used for spraying at sub-optimal weather conditions when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum. • Air inclusion nozzle • Working pressure: 1 to 5 bar • ISO flow, colors, sizes and nomenclature • Application rates from 60 to 400 l/ha (at 8 km/h) • SYNTAL – precision molded thermoplastic
Available: instock
8.54
Hardi ISO F-110 Standard Flat fan spray nozzle All-round flat fan nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle, with its precision moulded SYNTAL thermoplastic construction, will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements)
Available: instock
5.99
HARDI ISO F-110 -FLAT FAN NOZZLE All-round flat fan nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle, with its precision moulded SYNTAL thermoplastic construction, will give you excellent and uniform liquid distribution at boom heights from 35 to 70 cm (50 cm recommended to take care of uneven terrain or boom movements)
Available: instock
4.99
Twin Flat Spray • Dual outlet design produces two 110° flat fan spray patterns using the patented technology from the Turbo TeeJet® nozzle. The angle between each spray pattern is 60° forward and back. • Best suited for broadcast spraying where superior leaf coverage and canopy penetration is important. • Droplet size range is slightly larger than for the same capacity Turbo TeeJet nozzle providing drift-reducing properties with increased canopy coverage and penetration. • Molded polymer for excellent chemical and wear resistance. • Available in VisiFlo color-coded capacities with pressure ranges from 20-90 PSI (1.5-6 bar). • Ideal for use with automatic sprayer controllers. • Automatic alignment when used with 25612-3-NYR Quick TeeJet cap and gasket.
Available: instock
1.99
TEEJET SJ 7- produces seven identical fluid streams for excellent distribution quality in broadcast applications Solid stream pattern minimizes leaf burn and virtually eliminates drift. Acetal body and deflector plate construction for good wear life and chemical resistance • Creates seven identical fluid streams of equal velocity and capacity • Excellent spray distribution quality • Removable metering orifice for easy cleaning • Offered in a variety of sizes for a wide range of application rates • VisiFlo color-coding for easy capacity identification • All acetal construction for excellent chemical resistance • Recommended operating pressure: 20-60 PSI • Solid stream pattern minimizes leaf burn and virtually eliminates drift
Available: instock
8.99
Twin Flat Spray • 110 degree wide, tapered flat spray angle with air induction technology offers better drift management. • Made of a two-piece UHMWPE polymer construction with VisiFlo color-coding. UHMPE provides excellent chemical resistance, including acids, as well as exceptional wear life. • Compact size to prevent tip damage. • Depending on the chemical, produces large air-filled drops through a Venturi air aspirator. • Removable pre-orifice. • Available in seven tip capacities with a wide operating pressure range: 15-90 PSI (1-6 bar). • Automatic alignment when used with 25612-*-NYR Quick TeeJet cap and gasket.
Available: instock
1.50
Air Induction Flat Spray Produces a 110° tapered edge flat spray pattern for uniform coverage in broadcast spraying applications. • Available with a polymer insert holder with stainless steel (015€“15 capacities), ceramic (025€“05 capacities) or polymer (02€“10 capacities) inserts. • Larger droplets for less drift. • Depending on the chemical, produces large air-filled drops through the use of a Venturi air aspirator. • AI TeeJet nozzle molded into Quick TeeJet cap provides automatic spray alignment. • Includes tightly fitting washer that stays put and assures a good seal. • Recommended pressure rating 30-115 PSI (2-8 bar).
Available: instock
8.99
• Provides excellent penetration and seed head coverage for fungicide spraying on cereal crops. • AI3070 produces two wide angle, flat spray patterns for uniform coverage in broadcast applications. • 30° forward tilted spray penetrates dense crop canopies, while the backward tilted 70° spray maximizes coverage of the crop seed head.• • Suggested spray pressure range of 20–90 PSI (1.5–6 bar).
Available: instock
1.99